OWON 2chs low-noise 70MHz 1GSa/S 8-bit ADC 8” screen TAO3072 tablet oscilloscope

Description

OWON
TAO3072
2 chs low-noise 70MHz 1GSa/S 8-bit ADC 8” touch screen tablet oscilloscope
8000mAh battery
5 hours USB LAN SCPI LabVIEW
+ Dual channels, 70MHz-120MHz bandwidth, 1GS/s sample rate
+ Ocilloscope+ 4 1/2 digits multimeter+data logger
+ Optional 14-bit high resolution ADC
+ Max 40M record length; max 45,000 wfms/s waveform refresh rate
+ Built-in 8000mAh large capacity battery, can word continuously for 5 hours
+ 8 inch multi=point capacitive touchscreen
+ SCPI, and LabVIEW supported
+ multi- trigger, and bus decoding function
+ multi-interface integration - USB host, USB device,LAN,WIFI(optional)
Specifications
Model
TAO3072
TAO3102
TAO3122
TAO3072A
TAO3102A
TAO3122A
Bandwidth
70MHz
100MHz
120MHz
70MHz
100MHz
120MHz
Sample Rate
1GS/s
Vertical Resolution (A/D))
8 bits
8bits/12bits/14 bits
Record length
40M
Waveform Refresh Rate
45,000 wfms/s
Horizontal Scale (s/div))
1ns/div - 1000s/div, step by 1 - 2 - 5
Channel
2
Display
8" color LCD, 800 x 600 pixels display，multi-touch screen
Input Impedance
1MΩ ± 2%, in parallel with 15pF ± 5pF
Max Input Voltage
1MΩ ≤ 300Vrms;
DC Gain Accuracy
±3%
Probe Attenuation Factor
0.001X - 1000X, step by 1 - 2 - 5
Sample Rate / Relay Time Accuracy
±2.5ppm
Input Coupling
DC, AC, GND
Vertical Sensitivity
1mV/div - 10V/div (at input)
Trigger Type
Edge, Video, Pulse, Slope, Runt, Windows, Timeout, Nth Edge, Logic, I2C, SPI, RS232,
and CAN (optional)
Bus Decoding(optional)
I2C, SPI, RS232, CAN
Trigger Mode
Auto, Normal, and Single
Automatic Measurement
Vpp, Vavg, Vrms, Freq, Period, Week RMS, Cursor RMS, Vmax, Vmin, Vtop, Vbase, Vamp, Overshoot, Phase A→B ↑, Phase A→B↓, Preshoot, Rise Time, Fall Time,+Width, -Width, +Duty, -Duty, Duty Cycle, Delay A→B ↑, Delay A→B↓, +Pulse Count, -Pulse Count, Rise Edge Count, Fall Edges Count, Area, Cycle Area
Waveform Math
＋, －, ×, ÷, FFT，FFTrms,Intg,Diff,Sqrt, User Defined Function, Digital Filter
Waveform Storage
100 waveforms
Communication Interface
USB host, USB device, USB port for PictBridge,LAN, and WIFI (optional)
Frequency Counter
available
Battery
7.4V, 8000mAh， 5 hours operation
Dimension(WxHxD)
270x191x48（mm）
Device Weight
About 1.7kg
＋Multiemeter Specifications（only apply for 2 channels model）
Display
Voltage
Current
Impedance
Diode
Auto Ranging
4 1/2 digitals
mV: 20.000mV - 200.00mV
DCV: 2.0000V - 1000.0V
ACV: 2.0000V - 750.0V
ACD: 20.00A ACA:20.00A
200.00Ω - 100.00MΩ
√
√